manualshive.com logo in svg

Hyundai Elantra 2018, Руководство пользователя, Страница: 109 / 526

Поделиться
Скачать
Hyundai Elantra 2018 Скачать руководство пользователя страница 109

3-32

Convenient features of your vehicle

Standard programming
To train most devices, follow these
instructions:
1. For first-time programming, press and

hold the two outside buttons,
HomeLink

®

Channel 1 and Channel 3

Buttons, until the indicator light begins
to flash (after 20 seconds). Release
both buttons. Do not hold the buttons
for longer than 30 seconds.

2. Position the end of your hand-held

transmitter 1-3 inches (2-8 cm) away
from the HomeLink

®

buttons while

keeping the indicator light in view.

3. Simultaneously press and hold both

the HomeLink

®

and hand-held trans-

mitter button. DO NOT release the but-
tons until step 4 has been completed.

4. While continuing to hold the buttons

the red Indicator Status LED will flash
slowly and then rapidly after
HomeLink

®

successfully trains to the

frequency signal from the hand-held
transmitter. Release both buttons.

5. Press and hold the just-trained

HomeLink

®

button and observe the

red Status Indicator LED. If the indica-
tor light stays on constantly, program-
ming is complete and your device
should activate when the HomeLink

®

button is pressed and released.

6. To program the remaining two

HomeLink

®

buttons, follow steps 2

through 5.

Gate operator & Canadian programming
During programming, your handheld
transmitter may automatically stop trans-
mitting. Continue to press the Integrated
HomeLink

®

Wireless Control System but-

ton (note steps 2 through 4 in the
Standard Programming portion of this
document) while you press and re-press
("cycle") your handheld transmitter every
two seconds until the frequency signal
has been learned. The indicator light will
flash slowly and then rapidly after sever-
al seconds upon successful training.

Operating HomeLink

®

To operate, simply press and release the
programmed HomeLink

®

button.

Activation will now occur for the trained
device (i.e. garage door opener, gate
operator, security system, entry door
lock, home/office lighting, etc.). For con-
venience, the hand-held transmitter of
the device may also be used at any time.

Reprogramming a single HomeLink

®

but-

ton
To program a new device to a previously
trained HomeLink

®

button, follow these

steps:
1. Press and hold the desired

HomeLink

®

button. Do NOT release

until step 4 has been completed.

2. When the indicator light begins to

flash slowly (after 20 seconds), posi-
tion the handheld transmitter 1 to 3
inches away from the HomeLink

®

sur-

face.

3. Press and hold the handheld transmit-

ter button. The HomeLink

®

indicator

light will flash, first slowly and then
rapidly.

4. When the indicator light begins to

flash rapidly, release both buttons.

5. Press and hold the just-trained

HomeLink

®

button and observe the

red Status Indicator LED. If the indica-
tor light stays on constantly, program-
ming is complete and your new device
should activate.

Содержание Elantra 2018















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов