3-18
No
Condition
Possible causes
Check list from operation noises
Correction
1
2
3
4
Noise in NEUTRAL only.
Pump noise not normal.
Noise in the transmission
that is not normal.
Noise in the control valve.
Worn bushing in pump
assembly.
Worn one-way clutch in torque
converter.
Oil level low.
Converter housing or converter
tangs not in alignment with
engine or transmission pump.
A loud sound at short time
periods gives an indication that
foreign material is in the
transmission hydraulic system.
A constant loud noise is an
indication of pump failure.
Converter housing or converter
tangs not in alignment with
engine or transmission pump.
Transmission components have
wear or damage.
Damaged gears.
Worn teeth or clutch plates
and/or clutch discs and slipping
clutch plates and discs noise.
Failure of the thrust washers.
Other component parts have
wear or damage.
Air in the hydraulic system.
Air leakage on suction side of
the pump or low oil level that
causes aeration.
Restrictions in oil passage.
Valve spools movement has
restriction.
Changing is related with other
componrent of charging.
Charging to torque converter
assy.
Check to oil level.
Should be alignment with engine
or transmission pump.
Charging to the oil pump.
Charging to the oil pump.
Should be alignment with engine
or transmission pump.
Transmission components have
wear or damage.
Charging to gear.
Charging to plate and disc.
Charging to thrust washer.
Charging to other component.
Charging to control valve assy.
Charging to control valve assy.
Charging to control valve assy.
(1)
(2)
(3)
(4)
(1)
(2)
(1)
(2)
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(1)
(2)
(1)
(2)
(1)
(2)
(3)
a.
b.
c.
e.
a.
b.
c.
e.
a.
(2)
Содержание 60L-7A
