FEATURES OF YOUR HYUNDAI
1- 58
B970C02E-GAT
Automatic Operation
HGK020
The FATC (Full Automatic Temperature Control)
system automatically controls heating and cool-
ing as follows:
1. Push the "AUTO" switch. The indicator light
will illuminate confirming that the Face, Floor
and/or Bi-Level modes as well as the blower
speed and, air conditioner will be controlled
automatically.
2. Push the "TEMP" button to set the desired
temperature.
The temperature will increase to the maxi-
mum 32°C(90°F) by pushing on the button.
Each push of the button will cause the tem-
perature to increase by 0.5°C(1°F).
The temperature will decrease to the mini-
mum 17°C(62°F) by pushing on the button.
Each push of the button will cause the tem-
perature to decrease by 0.5°C(1°F).
G280A01GK
Photo sensor
HGK014
NOTE:
Never place anything over the sensor which
is located on the instrument panel to ensure
better control of the heating and cooling
system.
NOTE:
If the battery has been discharged or discon-
nected, the temperature mode will reset to
centigrade degrees.
This is a normal condition and you can change
the temperature mode from centigrade to
farenheit as follows;
Press the TEMP button down 3 seconds or
more with the button held down. The
display shows that the unit of temperature is
adjusted to centigrade or fahrenheit.
(°C °F or °F °C)
OUTSIDE
TEMP