DRIVING YOUR HYUNDAI
2- 3
C050A01A-AAT
STARTING
WARNING:
Never run the engine in a closed or poorly
ventilated area any longer than is needed to
move your car in or out of the area. The
carbon monoxide gas emitted is odorless
and can cause serious injury or death.
C050B01A-GAT
Normal Conditions:
The Starting Procedure:
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and place the
gearshift lever (manual transaxle) in neutral
or the selector lever (automatic transaxle) in
"P" (park) position.
3. After turning the ignition key to the "ON"
position, make certain all warning lights and
gauges are functioning properly before start-
ing the engine.
WARNING:
Be sure that the clutch is fully depressed
when starting a manual transaxle vehicle.
Otherwise, there is the potential to cause
damage to the vehicle or injury to someone
inside or outside the vehicle as a result of the
forward or backward movement of the ve-
hicle that will occur if the clutch is not de-
pressed when the vehicle is started.
4. Turn the ignition key to the "Start" position
and release it when the engine starts.
C070C01A-AAT
To remove the ignition key
1. Turn the ignition key to the "ACC" position.
2. Simultaneously push and turn the ignition key
counterclockwise from the "ACC" position to
the "LOCK" position.
3. The key can be removed in the "LOCK"
position.
C050A01E
LOCK
ON
START
C070C01E
LOCK
ACC
ON
START