CONTROLS AND EQUIPMENT
1- 16
B230E01GK
Back panel
Front of Vehicle
Tether
strap hook
B230C02GK-GAT
Securing a Child Restraint System with
"Tether Anchorage" System
Two child restraint hook holders are located on
the vertical back panel.
Load Space Cover
1. Route the child restraint seat strap over the
seatback.
For vehicles with adjustable headrests, route
the tether strap under the headrest and be-
tween the headrest posts, otherwise route
the tether strap over the top of the seatback.
2. Remove the load space cover.
3. Connect the tether strap hook to the child
restraint hook holder and tighten to secure
the seat.
B230C04A-EAT
Securing a Child Restraint System with
"ISOFIX" System and "Tether Anchor-
age" System
B230F01GK
ISOFIX is a standardised method of fitting child
seats that eliminates the need to use the stan-
dard adult seat belt to secure the seat in the
vehicle. This enables a much more secure and
positive location with the added benefit of easier
and quicker installation.
An ISOFIX-seat can only be installed if it has
vehicle-specific approval in accordance with the
requirements of ECE-R44. For your Hyundai,
the Hyundai ISOFIX GR1 / Hyundai Duo / Römer
ISOFIX GR1 and the Römer Duo ISOFIX / Britax
Duo ISOFIX is approved according to the re-
quirement ECE-R44. This seat has been tested
extensively by Hyundai and is recommended for
your Hyundai.