CONTROLS AND EQUIPMENT
1- 34
SB220D1-E
HIGH AND LOW BEAM
To turn on the headlight high beams, push the
lever forward (away from you). For low beams,
pull the lever back (toward you). The appropriate
headlight beam indicator light will come on at the
same time.
SB220E1-E
HEADLIGHT FLASH
SB220C3-E
LIGHTING SWITCH
The vehicle sidelamps and headlamps are oper-
ated by rotating the end of the turn signal switch
barrel. To operate the sidelight, rotating the switch
to the first detent with ignition switch at the "OFF"
position will cause the lamps to illuminate. To
operate the headlamps, the turn signal switch
barrel should be rotated to the second detent.
The headlamps will only operate when the igni-
tion switch is at the "On" position. If the ignition
switch is turned to the "Off" position, only the
sidelight will function.
The headlight may be flashed by pulling the turn
signal switch lever towards the steering wheel.
The headlight will be extinguished when the
switch is released.
To indicate an intention to change lanes, moving
the lever slightly towards the direction of the
relevant turn signal will cause the turn signal
lamps to flash. When the lever is released, it will
return to the "off" position.
HGK039-D
To operate the automatic light feature, turn the
barrel on the end of the multi-function switch. If
you set the multi-function switch to "AUTO", the
tail lights and headlights will be turned automati-
cally on or off according to external illumination.
B340G01L-GAT
Auto Light (Not all models)
HGK041-D
HGK233-D
NOTE:
The ignition must be in the "ON" position to
turn on the headlights.
Parking light auto cut
If you do not turn the parking lights "OFF" after
driving, the parking lights will automatically shut
"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn the
ignition key to the "ON" position.
