CONTROLS AND EQUIPMENT
1- 51
B710A01GK-EAT
HEATING AND COOLING CONTROL
1. Side defrost nozzle
2. Side Ventilator
3. Centre Ventilator
4. WindScreen Defrost Ventilator
HGK001A-D
1
2
3
1
2
B710A01S-AAT
VENTILATION
To operate the ventilation system:
o Set the air intake control on "Fresh" mode
( ).
o To direct all intake air to the dashboard vents,
set the airflow control to "Face".
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
B710C01S-AAT
SIDE VENTILATOR
The side ventilators are located on each side of
dashboard. To change the direction of the air
flow, move the knob in the center of the vent up-
and-down and side-to-side. The side vent knobs
control the amount of outside air entering the
vehicle through the side vents. The vents are
opened when the vent knob is moved to the up
position. The vents are closed when the vent
knob is moved to the down position. Keep these
vents clear of any obstructions.
B710B01S-DAT
CENTRE VENTILATOR
The centre ventilators are located in the middle of
the dashboard. The direction of air flow from the
vents in the centre of the dashboard is adjust-
able.
To control the direction of the air flow, move the
knob in the centre of the vent up-and-down and
side-to-side.
4