CONTROLS AND EQUIPMENT
1- 50
o During cruise-control driving with a manual
transaxle vehicle, do not shift into neutral
without depressing the clutch pedal, or the
engine will be overrevved. If this happens,
depress the clutch pedal or release the
main switch.
o With the cruise control engaged, when the
brake pedal is applied, it is normal to hear
the cruise control system deactivate. This
is an indication of normal system opera-
tion.
o During normal cruise control operation,
when the "SET(COAST)" is activated or
reactivated after applying the brakes, the
cruise control will energize after approxi-
mately 3 seconds. This delay is normal.
B660B01GK
B660D01GK
B660F01E-AAT
To Reset at a Slower Speed
1. Push the control switch downward to "SET
(COAST)" position and hold it. The vehicle
will decelerate.
2. When the desired speed is obtained, release
the control switch. While the control switch is
pushed, the vehicle speed will gradually de-
crease.
WARNING:
o Keep the main switch off when not using
the cruise control.
o Do not use the cruise control when it may
not be safe to keep the car at a constant
speed, for instance, driving in heavy or
varying traffic, or on slippery (rainy, icy or
snow-covered) or winding roads or over
6% up-hill or down-hill roads.
o Pay particular attention to the driving con-
ditions whenever using the cruise control
system.
B660D01E-AAT
To Resume the Preset Speed
The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch upward to "RESUME (ACCEL)"
position and release it to return providing the
vehicle speed is above 25 mph (40 km/h).
B660E01E-AAT
To Reset at a Faster Speed
1. Push the control switch upward to "RESUME
(ACCEL)" position and hold it.
2. Accelerate to desired speed and release the
control switch. While the control switch is
held, the vehicle will gradually gain speed.
