OWNER MAINTENANCE
6-8
CAUTION:
Sparking plugs must only be cleaned using
purpose designed equipment. Wire brushing
may damage the centre electrode insulator
causing mis-firing to occur. Only the correct
grade of sparking plug should be used. Use
of an incorrect grade may result in serious
engine damage.
3. With the heater temperature control set to the
"HOT" position, remove the radiator cap and
open the radiator drain tap.
4. When the engine coolant has drained com-
pletely, close the drain tap ensuring that this
is not over tightened.
5. Prepare a suitable quantity of new engine
coolant (refer to section 9) and pour this into
the radiator.
6. Start the engine with the radiator cap still
removed and continue to add coolant as the
level decreases as air is expelled from the
system. When the level remains constant,
replace the radiator cap and replenish the
coolant reservoir.
7. When the engine is hot, check to ensure that
no coolant leaks are present.
WARNING:
The cooling fan is controlled by engine cool-
ant temperature and may sometimes operate
even when the engine is not running. Use
extreme caution when working near the blades
of the cooling fan so that you are not injured
by a rotating fan blade. As the engine coolant
temperature decreases, the fan will automati-
cally shut off. This is a normal condition.
G060B02GK-EAT
SPARKING PLUG REPLACEMENT
This operation should only be performed when
the engine is cold.
1. Remove the engine rocker cover.
NOTE:
It is recommended that the spark plug for
Engine 2.7L should be changed by an autho-
rized Hyundai dealer.
2. Remove plug lead from the sparking plug to
be replaced, pulling the lead by the rubber
cap. (Pulling the lead may damage the carbon
conductor).
3. Clean around the base of the plug to be
removed, and install the plug socket ensuring
that the ceramic insulator does not become
damaged. Turn the socket counterclockwise
to remove the plug.
YN60100A
0.039 ~ 0.043 in. (1.0 ~ 1.1 mm)
0.039 ~ 0.043 in. (1.0 ~ 1.1 mm)
DOHC
V6
HGK256