CONTROLS AND EQUIPMENT
1- 43
SB380A1-E
PARKING BRAKE
The parking brake must always be set when the
vehicle is to be left unattended. When the parking
brake is applied, and the ignition key is at the
"ON" position, the parking brake warning lamp
will be illuminated. Before driving the vehicle, the
parking brake must be fully released and the
warning lamp extinguished.
o To set the parking brake, apply the foot brake
and pull the parking brake lever up with the
button depressed. Release the button when
the brake is fully applied.
o To release the parking brake, apply the foot
brake and pull up the parking brake lever
slightly. Depress the button and lower the
lever.
SB370A1-E
INTERIOR REAR VIEW MIRROR
The interior mirror is of the day/night type to
enable the glare of headlamps from following
vehicles to be eliminated during night time driv-
ing.
The tab located at the bottom of the mirror should
be set to the position nearest the windscreen for
normal day time driving, and flipped towards the
rear of the vehicle to eliminate glare during night
time driving. To adjust the field of vision, the
mirror may be moved by hand upon the mount-
ing.
NOTE:
The mirror should always be adjusted prior to
setting the vehicle in motion.
B520A01GK
B520B01O-GAT
DAY/NIGHT REAR VIEW MIRROR
(Electric type) (Not all models)
The electric type day/night inside rearview mirror
automatically controls the glare of headlights of
the car behind you. Adjust the rearview mirror to
the desired position.
B520B01GK
Sensor
HGK178