HYOSUNG GT 650, Руководство по обслуживанию

Страница: 109 / 210

ENGINE COOLANT
At the time of manufacture, the cooling system is filled
with a 50 : 50 mixture of distilled water and ethylene gly-
col anti-freeze.
This 50 : 50 mixture will provide the optimum corrosion
protection and excellent heat protection, and will protect
the cooling system from freezing at temperatures above
-31
(-24 )
If the motorcycle is to be exposed to temperatures
below -31
(-24 ), this mixing ratio should be
increased up to 55% or 60% according to the figure.
5-1 COOLING SYSTEM
CAUTION
Use a high quality ethylene glycol base anti-
freeze, mixed with distilled water. Do not mix
an alcohol base anti-freeze and different
brands of anti-freeze.
Do not rut in more than 60% anti-freeze or less
than 50%. (Refer to Right figure.)
Do not use a radiator anti-leak additive.
50% Engine coolant including reserve tank capacity
Anti-freeze
Water
WARNING
You can be injured by scalding fluid or steam if you open the radiator cap when the engine is hot. After the
engine cools, wrap a thick cloth around cap and carefully remove the cap by turning it a quarter turn to
allow pressure to escape and then turn the cap all the way off.
The engine must be cool before servicing the cooling system.
Coolant is harmful;
If it comes in contact with skin or eyes, flush with water.
If swallowed accidentally, induce vomiting and call physician immediately.
Keep it away from children.
Freezing point
Boiling point
Gauge pressure
Density(%)
Fig.1 Engine coolant density-freezing
point curve.
Density(%)
Fig.2 Engine coolant density-boiling
point curve.
Anti-freeze density Freezing point
50%
55%
60%