HygroMatik FLE TSPA Series, Руководство пользователя

Страница: 49 / 94

Page 49
6.8.10 Weekly timer submenu
The weekly timer is used to program two
switching time ranges per day of the week,
each defined by "Start time" and "End time".
A set point temperature value and an
essence can be assigned to each switching
time range.
The activation of the timer can be carried out
in the "Functions" submenu using parameter
no. 8 ("Weekly timer"). The setting options
are "On" and "Off".
When operating the control in weekly timer
mode, the display of the temperature set
value in the main display disappears during
normal steam generation. In ECO mode,
however, the set value specification remains
visible.Table of weekly timer parameters
Table of weekly timer parameters
The table only shows the possible parameter
settings for Monday. The paramters for the
rest of the weekdays (Tuesday to Sunday)
can be programmed in the same way.
3OHDVHQRWH
No. Parameter No. Meaning/comment
[ ] explains the term in the glossarF
min max FP
 [ ] refers to a related term explanation
1 Mon_start_time 1 00:00 23:59 08:00
Start time 1 for Monday (1st period)  [91]
2 Mon_stop_time 1 00:00 23:59 12:00 End time 1 for Monday
3 Mon_essence 1 Essence selection for the 1st period on Monday
0 Off No essence
1
Essence 1
Essence 1
2 Essence 2 Essence 2
3 Essence 3 Essence 3
4 Essence 4 Essence 4
4 Mon_temp. 1
20.0 49.0
45.0
Steam bath target temperature [°C] for the 1st period on Monday
6 Mon_start_time 2 00:00 23:59 13:00
Start time 2 for Monday (2nd period)

[91]
7 Mon_stop_time 2 00:00 23:59 20:00 End time 2 for Monday
8 Mon_essence 2 Essence selection for the 2nd period on Monday
0 Off No essence
1 Essence 1 Essence 1
2 Essence 2 Essence 2
3 Essence 3 Essence 3
4 Essence 4 Essence 4
9 Mon_temp. 2 20.0 49.0 45.0 Steam bath target temperature for the 2nd period on Monday
Adjustment/value range
Factory presets (FP)
bold