HYDAC FILTER SYSTEMS GMBH
Operation | 6
BeWa CTU1x5x 4603539 en-us web
53 / 120
6.1 Switching the extraction unit on / off
Switching on the extraction unit
To switch on the extraction unit, proceed as follows:
ü
Before switching on, check that the plug is inserted and the
pressurized air supply is open.
1. Switch on the extraction unit with the main switch.
ð
After ≈ 5 … 8 seconds, it can be seen on the monitor that
the computer has started.
2. After the loading of the Operating System, the user interface
of the extraction unit starts.
O
Select the required operating mode or start an extraction.
Refer to the ConTeS software manual for details on the user in-
terface.
Switching the extraction module off
To switch off the extraction unit, proceed as follows:
3. End the user interface.
4. Shut down the computer.
5. Switch off the extraction unit with the main switch.
O
The extraction unit is now switched off and depressurized.
NOTICE! Wait for ≥ 20 seconds before you switch it on
again.
1
2
3
4
5
6
7
8
9
A