HYDAC FILTER SYSTEMS FAM-5-M-2-A-05-R-H-B-Z-1, Инструкция по эксплуатации и техническому обслуживанию

Страница: 73 / 100

Performing maintenance
FAM 5 en(us) 73 / 100
BEWA FAM5 3667663b en-us 2012-12-12.doc 2012-12-12
Changing the oil of the vacuum pump
The first oil change must take place after 100 operating hours. Afterwards,
the interval increases to ~ 3000 hours or twice per year.
The vacuum pump must be at operating state temperature when the oil is
changed:

Put the FAM into operation for 10 minutes.

Switch off the FAM at the main switch.

Wait until the pressure in the vacuum column has reached atmospheric
pressure (~ 1000 mbar absolute).
To perform these tasks, you will need the following tools and
equipment:

Compressor oil VE101 (for part-no., see replacement parts list)
To change the oil on the vacuum pump, proceed as follows:
1. Empty
the vacuum pump as described on page 71.
2. Remove the old oil filter and dispose of it in an environmentally friendly
manner.
3. Install the new oil filter.
4. Fill the vacuum pump as described on page 68.
5. The oil change and oil filter change is complete.