Hussmann ARL Скачать руководство пользователя страница 56

Страница: 56 / 62

CLAV

Control Average Temperature – This is the temperature

that the control algorithm is using as the process variable

in controlling the output device. This value is only

present when one or more Safe-NET display modules is

used in conjunction with a Safe-NET control module.

This configuration is used to control EEXP, EEPR and

VSD compressor configurations. The value is

representative of the average of the control value

(discharge air or product simulator temperature) as

reported from one or more Safe-NET display modules.

This value is transmitted to the Safe-NET display

module(s) from the Safe-NET control module for display

purposes only. Because this value is not user changeable,

no PASSWORD is required.

If no data is available, or communication between the

Safe-NET display module(s) and the Safe-NET control

module has failed, ‘----’ will be displayed. The value is

updated at 5-second intervals from the Safe-NET control

module.

DSVR

The Safe-NET display module software version. The value

is not user changeable so a PASSWORD isn’t needed.

DHVR

Safe-NET display module hardware version. The value is

not user changeable so a PASSWORD isn’t needed.

CSVR

Safe-NET Control module software version. The value is

not user changeable so a PASSWORD isn’t needed.

CHVR

Safe-NET Control module hardware version. The value is

not user changeable so a PASSWORD isn’t needed.

4-41

P/N 0461391A

Hussmann Corporation • Bridgeton, Missouri 63044-2483 U.S.A.

Safe-NET™

DSVR

Value

Menu Structure — DSVR

DHVR

Value

Menu Structure — DHVR

CHVR

Value

Menu Structure — CHVR

CSVR

Value

Menu Structure — CSVR

CLAV

Value

Menu Structure — CLAV

Содержание ARL































































Результаты поиска

Содержание ARL

Отзывы:

Hussmann ARL, Руководство техника, Страница: 56 / 62

Результаты поиска

Содержание ARL

Отзывы: