Hussmann ARL Скачать руководство пользователя страница 27

Страница: 27 / 62

DSPN

The DSPN parameter sets the network address of the

Safe-NET display module. When the Safe-NET system

applied does not require the Safe-NET control module or

is in a non-networked installation, this setting has no

effect.

When the Safe-NET display module is applied in a

networked system, a unique address is required to identify

the Safe-NET display module on the network. This allows

multiple Safe-NET display modules to synchronize their

control and alarm activities and provide temperature

information to a central control device. The Safe-NET

display modules must communicate this information via a

network cable to the Safe-NET control module network

master device.

Setting this parameter is done in the SETUP menu. After

navigating to the DSPN sub menu item, the display will

cycle between DSPN and the current address setting.

While the address value is being displayed, press ENTER

on the Hand-Held device or press the SELECT button on

the Safe-NET display module to allow editing of the

value. When the Safe-NET display module begins flashing

the value, use the UP or DOWN arrow keys on the Hand-

Held device or the UP /DOWN buttons on the Safe-NET

display module to increment or decrement the value to

the desired address.

Once the desired address is displayed, press the ENTER

key on the Hand-Held device or the SELECT button on

the Safe-NET display module to store the new value to

NV memory. The display will revert to cycling between

DSPN and the new value.

Note:

The Safe-NET system must be RESET for the new value to

take effect.

Factory default is none.

RST

Resetting (Warm Boot) of the Safe-NET system can be

achieved by navigating to the RST sub menu within the

SETUP menu.

4-12

P/N 0461391A

MENUS

Menu Structure — DSPN

Содержание ARL































































Результаты поиска

Содержание ARL

Отзывы:

Hussmann ARL, Руководство техника, Страница: 27 / 62

Результаты поиска

Содержание ARL

Отзывы: