Husqvarna TE 250 Скачать руководство пользователя

Страница: 115 / 169

ELECTRICAL SYSTEM 15

113

15.8

Changing the headlight bulb

Note

Damage to reflector

Grease on the reflector reduces the light intensity.

Grease on the bulb will evaporate due to the heat and be deposited on the reflector.

–

Clean and degrease the bulbs before mounting.

–

Do not touch the bulbs with your bare hands.

Preparatory work

–

Remove the headlight mask with the headlight. (

p. 111)

H03753-10

Main work

–

Turn protection cap

together with the underlying bulb

socket counterclockwise all the way and remove it.

–

Pull bulb socket

of the position light out of the reflector.

H03754-10

–

Pull out headlight bulb

–

Insert the new headlight bulb.

Headlight (HS1/socket BX43t) (

p. 150)

–

Insert the protection cap with the bulb socket into the reflec-

tor and turn it clockwise all the way.

O-ring

is correctly positioned.

–

Insert the bulb socket of the position light into the reflector.

Finishing work

–

Install the headlight mask with the headlight. (

p. 111)

–

Check the headlight setting. (

p. 114)

15.9

Changing the turn signal bulb (All EU/AR standard models)

Note

Damage to reflector

Grease on the reflector reduces the light intensity.

Grease on the bulb will evaporate due to the heat and be deposited on the reflector.

–

Clean and degrease the bulbs before mounting.

–

Do not touch the bulbs with your bare hands.

Содержание TE 250










































































































































































Результаты поиска

Содержание TE 250

Отзывы:

Похожие инструкции для TE 250

Бренды по названию

Популярные бренды

Husqvarna TE 250, Руководство пользователя

Результаты поиска

Содержание TE 250

Отзывы:

Похожие инструкции для TE 250

Бренды по названию

Популярные бренды