Husqvarna TE 250, Руководство пользователя

Страница: 108 / 169

15 ELECTRICAL SYSTEM
106
S04848-10
–
Connect positive cable
bk
to the 12-V battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm (1.84 lbf ft)
Info
Contact disk
A
must be mounted under screw
bl
and cable lug
bm
with the claws toward the battery
terminal.
–
Slide positive terminal cover
bn
over the positive terminal.
–
Connect negative cable
bo
to the 12-V battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm (1.84 lbf ft)
Info
Contact disk
A
must be mounted under screw
bl
and cable lug
bm
with the claws toward the battery
terminal.
Finishing work
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. ( p. 68)
15.3 Charging the 12-V battery
Warning
Risk of injury
12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Note
Environmental hazard
12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.