Huntleigh Sonicaid FM800 Series, Инструкция по эксплуатации, Страница: 80 / 130

Sonicaid FM800 Encore Series Instructions for Use
80
10.4
88B
Print speed and duration
Print speed is selectable at 1, 2 or 3 cm/sec according to user preference or local clinical
practice. Total running times with a standard 45m pack of Sonicaid paper are as follows:
Speed Running Time
1cm/sec 75 hours
2cm/sec 37.5 hours
3cm/sec 25 hours
10.5
89B
Changing paper packs
Paper packs generally have a pre-printed coloured marker to alert the user that the paper
is about to reach the end of its duration. With the Sonicaid paper this starts at
approximately 1 metre before the end of the pack, giving 30-100 minutes notice of paper
end. Use this time to unwrap and prepare a new pack ready for printing.
When the paper end is reached, the printer will stop. An alert will sound, the indicator
adjacent to the Printer on/off button starts to flash, and a message is displayed on the
screen. If the Print Buffer option is enabled (see section 5.3), print information will be
stored in memory for up to 60 minutes to allow the paper pack to be changed. Follow the
procedure described below for changing the paper pack.
Once a new pack of paper has been installed and the paper tray pushed home, the stored
data will be printed at a quick rate displaying the message "PRINTING STORED DATA"
until the buffer is empty. Then it will revert to printing live data with a permanently lit print
LED.
If the print buffer is disabled, the system will print live data once the paper tray is pushed
home.
Finally, ensure that at least one fresh pack of paper is available to replace the one fitted
when it comes to an end.
The printer buffer is cleared if the unit is turned off, or in
the event of a power failure. Any trace information stored
will be lost.
To avoid contact with sharp edges, do not insert hands
inside printer aperture.