Huntleigh Sonicaid FM800 Series, Инструкция по эксплуатации, Страница: 31 / 130

Sonicaid FM800 Encore Series Instructions for Use
31
4.8
51B
Timer
A timer can be set to provide an alert when a given period of time (1–99 minutes) has
elapsed. The timer starts when printing is started.
Note
: the timer cannot be set when Sonicaid CARE analysis or Sonicaid TREND analysis
is in progress.
162B
To set the timer
1 > SETUP > TIMER > ON.
2 Use + or – to set the length of time required.
3 > EXIT.
163B
Acknowledging the timer
When the set time has elapsed, FM800E beeps repeatedly (providing that the beep is
turned on). In the main screen, the Alarm Acknowledge key shows the message:
TIMER FINISHED
To stop the beep: > ALARM ACKNOWLEDGE.
164B
To turn the timer off
> SETUP.
> TIMER.
> OFF.