Huntleigh Sonicaid FM800 Series, Инструкция по эксплуатации, Страница: 33 / 130

Sonicaid FM800 Encore Series Instructions for Use
33
5
4B
System Settings and Default Alarms
5.1
53B
Overview
The System Settings and Default Alarms screens allow preferences to be set which are
protected by an access code (2755). These preferences remain in force when you switch
the FM800E off, and then on again.
169B
System settings
The System Settings screen allows the operator to:
 Add or change EasiNote descriptions
 Display or not display the baby graphic
 Display or not display FECG or MECG waveforms
 Beep or not beep when a key is pressed
 Change the printer setup
 Change the international setup
 Beep or not beep when an Event Mark is recorded
 Select the host interface protocol
Service information can also be accessed via System Settings:
> SETUP.
> NEXT PAGE
> SYSTEM SETTINGS.
> access code (2755).
170B
Default alarms
The Default Alarms screen allows the following default alarms to be changed:
•
FHR
•
MECG
•
NBP
}
FM830E only
•
MSpO
2