Sonicaid FM800 Encore Series Instructions for Use
110
17
Care and Cleaning
After using chemicals ALWAYS rinse off / remove the chemical with
absorbent material, dampened in clean water and dry with a clean cloth.
CLEAN – DISINFECT – RINSE – DRY
All Huntleigh Products have been designed to withstand normal clinical use, however they
can contain delicate components which should be handled and treated with care.
17.1
General Care
Periodically, and whenever the integrity of the system is in doubt, carry out a check of all
functions as described in the relevant section of the IFU. If there are any defects to the
housing contact Huntleigh or your distributor for repair or to order a replacement.
•
Please ensure that you check with your facility’s local infection control policy
and medical equipment cleaning procedures.
•
Observe warnings and guidance on cleaning fluid labelling regarding use and
personal protective equipment (PPE).
•
Do not use abrasive cloths or cleaners.
•
Do not use automatic washers or autoclaves.
•
Do not use Phenolic detergent based disinfectants, solutions containing
cationic surfactants, ammonia based compounds or perfumes and antiseptic
solutions.
•
If detergent or disinfectant wipes are used ensure that excess solution is
squeezed from the wipe prior to use.
•
Always switch off Products and disconnect from the AC supply before
cleaning and disinfecting.
•
Do not allow any fluid to enter the Products and do not immerse in any
solution.
•
Always wipe off disinfectant using a cloth dampened with clean water.
17.2
General Cleaning and Disinfecting (Main unit / non
patient applied parts)
Always keep the external surfaces clean and free of dirt and fluids using a clean dry
cloth.
1. Wipe any fluids from the surface of the product using a clean dry cloth.
2. Wipe with a cloth dampened in 70% Isopropyl Alcohol.
3. Completely dry with a clean, dry cloth.
4. If the product has been contaminated use the methods described for patient applied
parts.
Содержание Sonicaid FM800 Series
Страница 1: ......