Human Elisys Quattro, Руководство пользователя

Страница: 81 / 88

Error Messages
ELISYS QUATTRO User Manual HUMAN 7-7
Table 7-3: Module 42 - Plate transport
Module 43 Photometer
Table 7-4: Module 43 - Photometer
Module 44 Washer
42 4D nn Motor jammed during movement. nn
shows the axis. Call service.
42 50 Plate carrier sensor failure. Call service.
42 52 Firmware was unable to compute a safe
route between the two positions. Call service.
42 57 EEPROM error. Call service.
Module
ID: Error
number:
Cause: Action
Module
ID: Error
number:
Cause: Action
43 41 Argument error in command. Check that the firmware is the correct
version for the version of software being
run. Call service.
43 42 Background light levels too high. Check position of lamp. Check filter posi-
tions. Call service.
43 43 A/D conversion error. Call service.
43 46 nn Filter error. nn shows the filter position. Call service.
43 48 nn Motor not homed. nn shows the motor. None. The software will reset the pho-
tometer and try again.
43 4C Lamp has blown. Replace the lamp.
43 4D nn Motor is jammed. nn shows the motor. Call service.
43 50 Plate carrier error. Check that the plate carrier correctly
breaks the sensor. Call service.
43 50 44 No scan data available. Call service.
43 50 4F A/D over-range error. Call service.
43 50 55 A/D under-range error. Call service.
43 50 57 Reading overrun error. Call service.
43 52 A/D reference voltage error. Call service.
43 54 nn Faulty optic channel. nn shows the filter
position. Call service.
43 57 EEPROM error. Call service.