Human Elisys Quattro, Руководство пользователя

Страница: 46 / 88

4-14 ELISYS QUATTRO User Manual HUMAN
Performing a Test Run
"Dragging" means clicking with the mouse on a resource, keeping the mouse
button pressed down, moving it to the desired location, and releasing the
mouse button again.
The
Auto Arrange
function always arranges the samples by using the
None
sort order as selected in the
Patient Editor
. After its use, it is rec-
ommended to perform a random manual verification of the sample IDs in the
rack. This type of verification is also recommended when working with a job
list manually created for sample tubes without barcodes.
1. Right LED lights up red.
2. Insert first rack into the right track.
3. Allocate the non-bar coded reagents on the
screen by dragging the mouse - corresponding to
the actual loading - to the reagent rack.
Each dot clearly corresponds to one reagent.
4. Insert the required racks one by one into the
tracks marked by the red LED and allocate the
resources as described above (from right to left).
5. On the screen, allocate the samples by dragging
the mouse - corresponding to the actual loading -
to the sample racks. Each dot clearly corre-
sponds to one patient tube or one reagent.
Auto Arrange Samples:
• Load procedure 1:
Load all sample racks and press on the Auto
Arrange button. The fill direction of the sam-
ples starts at position one of the rack placed in
the far left side.
• Load procedure 2:
Load the first sample rack and press on the
Auto Arrange button. The fill direction of the
samples starts at position one of the sample rack
just inserted.
Proceed this sequence with the remaining racks.