Human Elisys Quattro, Руководство пользователя

Страница: 62 / 88

5-4 ELISYS QUATTRO User Manual HUMAN
Loading - Unloading - Disposal
5.1.5.2 Load Patient Sample Racks with Bar Coded Samples
1. Insert the rack on that track that is marked by the red LED on the rear panel.
Place rack in front of the track and then push evenly up to the limit stop (with
the pin in the contact opening on the rear panel).
2. The LED goes off and jumps to the next position that can be loaded. (A red
flashing LED indicates that the rack was not identified correctly. Pull out the
rack and insert it once more.) A graphical representation of the correctly
inserted rack appears on the screen. From the pool of unallocated resources
in the right-hand side of the screen, the loaded samples are allocated to the
rack in accordance with the identified loading. Place the mouse pointer on the
sample to check the patient ID.
3. Insert the next racks as described.
4. After loading, close the flap again (audible click).
See notes on
page 5-2
5.1.5.3 Load Patient Sample Racks without Bar Coded Samples
1. Insert the rack on that track that is marked by the red LED on the rear panel.
Place rack in front of the track and then push evenly up to the limit stop (with
the tappet in the contact opening on the rear panel).
2. The LED goes off and the rack type is identified by the bar code scanner and
depicted on the screen with empty sample positions.
3. Insert the next racks in the track marked by the red LED.
4. Once you have loaded all racks distribute the unallocated samples displayed
on the screen on the individual rack positions with the mouse in accordance
with the identified loading.
5. Close the flap again (audible click).
See notes on
page 5-2