Hubner C-FLEX, Руководство пользователя

Страница: 14 / 82

14 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
Preparing the installation space
Read section 2 : Safety before continuing and be sure the appropriate laser safety precautions have been taken
before installing and operating the C-FLEX laser combiner.
Decide if the C-FLEX is to be mounted directly on an optical table or on the custom heat sink. When installing,
allow for the space required to remove the access panel whilst aligning the optics inside the system. It will be
necessary to open the lid for both installation and alignment.
C-FLEX access panel space requirement
If using the heatsink mounted on an optical table, the heat sink must be fastened to the table before mounting
the C-FLEX to the heatsink.
C-FLEX Mounted on optical table (left) and mounted on a heat sink (right)
Use the test protocol delivered with the system to understand which lasers have been integrated into the C-
FLEX to be installed. The Cobolt Laser series is listed just below the serial number.