Hubner C-FLEX, Руководство пользователя

Страница: 44 / 82

44 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
More An additional Cobolt Monitor™ window will open containing more detailed information of that
laser’s status.
TEC Settings Shows the running status and the fault status for the laser’s internal thermoelectric coolers (TEC).
Laser Operation Mode and Settings
Displays the set laser power. The user can switch between constant power mode, constant current
mode and modulation mode. Likewise, there are boxes to set the constant power level and constant
current level. In constant power mode the current will be set by Cobolt Monitor to reach the power
level set in the this field. When in modulation mode it is recommended to use an external power
meter. See section 5 and 6 for more details on continuous wave and modulation modes.
Autostart Program
Displays whether the laser is in CDRH (key switch enabled) or OEM (key switch disabled) mode and
displays the current laser operational status. There are also buttons to “abort” the autostart
sequence or to “restart” the laser after a fault.
Fault Status Displays ERROR messages. In the event of an ERROR, the laser action is stopped. When the reason
for the ERROR event is understood and the problem is addressed the fault status can be cleared with
“Clear Fault”. If the Autostart Program is enabled, click res tart to restart the laser.