The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
An NQA test instance is created and the test instance view is displayed.
Step 3
Run:
test-type
trace
A traceroute test is created.
Step 4
Run:
destination-address
ipv4
ip-address
The destination address of the traceroute test is configured.
Step 5
Run the following commands as required ( For detailed parameter configurations, see the chapter
Configuring Universal NQA Test Parameters
):
l
To configure the VPN instance to be tested, run the
vpn-instance
vpn-instance-name
command.
NOTE
Only S5700EI and S5700HI support the
vpn-instance
command.
l
To configure the maximum hops, run:
tracert-hopfailtimes
times
l
To configure the initial TTL and maximum TTL values of a packet, run:
tracert-livetime
first-ttl
first-ttl
max-ttl
max-ttl
l
To configure the source IP address, run:
source-address
ipv4
ip-address
l
To configure the destination port number, run:
destination-port
port-number
l
To configure a NQA test packets to be sent without searching the routing table, run:
sendpacket passroute
Step 6
Run:
start
An NQA test is started.
Select the start mode as required because the
start
command has several forms.
l
To start the NQA test immediately, run the
start
now
[
end
{
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
|
delay
{
seconds
second
|
hh
:
mm
:
ss
} |
lifetime
{
seconds
second
|
hh
:
mm
:
ss
} } ] command.
The test instance is started immediately.
l
To start the NQA test at the specified time, run the
start
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
[
end
{
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
|
delay
{
seconds
second
|
hh
:
mm
:
ss
} |
lifetime
{
seconds
second
|
hh
:
mm
:
ss
} } ] command.
The test instance is started at a specified time.
l
To start the NQA test after a certain delay, run the
start
delay
{
seconds
second
|
hh
:
mm
:
ss
} [
end
{
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
|
delay
{
seconds
second
|
hh
:
mm
:
ss
} |
lifetime
{
seconds
second
|
hh
:
mm
:
ss
} } ] command.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
6 NQA Configuration
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
276
