Huawei Quidway S8500 Series, Руководство по управлению

Страница: 924 / 1341

Command Manual – Security
Quidway S8500 Series Routing Switches Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-38
Parameter
radius-scheme radius-server-name
: Configures to delete the stopping accounting
requests from the buffer according to the specified RADIUS scheme.
radius-server-name
specifies the RADIUS scheme name with a character string not
exceeding 32 characters.
session-id session-id
: Configures to delete the stopping accounting requests from the
buffer according to the specified session ID.
session-id
specifies the Session ID with a
character string not exceeding 50 characters.
time-range start-time stop-time
: Configures to delete the stopping accounting requests
from the buffer according to the saving time. S
tart-time
specifies the start time of the
saving time range and
stop-time
specifies the stop time of the saving time range. The
time is expressed in the format hh:mm:ss-yyyy/mm/dd. When this parameter is set, all
the stopping accounting requests saved since
start-time
to
stop-time
will be deleted.
user-name user-name
: Configures to delete the stopping accounting requests from the
buffer according to the username.
User-name
specifies the username, a character
string not exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @
character can only be used once in one username. The pure username (the part before
@, namely the user ID) cannot exceed 24 characters.
Description
Use the
reset stop-accounting-buffer
command to reset the stopping accounting
requests, which are saved in the buffer and have not been responded.
After transmitting the stopping accounting requests, if there is no response from the
RADIUS scheme, the switch will save the packet in the buffer and retransmit it for
several times, which is set through the
retry stop-accounting
command.
This command is used to delete the stopping accounting requests from the switch
buffer. You can select to delete the packets transmitted to a specified RADIUS scheme,
or according to the Session-id or username, or delete the packets transmitted during
the specified time-range.
Related command:
stop-accounting-buffer enable
,
retry stop-accounting
,
display
stop-accounting-buffer
.
Example
# Delete the stopping accounting requests saved in the system buffer by the user,
user0001@huawei163.net.
<Quidway> reset stop-accounting-buffer user-name user0001@huawei163.net
# Delete the stopping accounting requests saved in the system buffer since 0:0:0 to
23:59:59 on August 31, 2002.
<Quidway> reset stop-accounting-buffer time-range 0:0:0-2002/08/31
23:59:59-2002/08/31