Huawei Quidway S8500 Series, Руководство по управлению

Страница: 894 / 1341

Command Manual – Security
Quidway S8500 Series Routing Switches Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-8
state
{
active
|
block
}: Configures to display the local users in the specified state.
active
means that the system allows the user requesting network service and
block
means the system does not allow the user requesting network service.
user-name user-name
: Configures to display a local user specified with
user-name
.
user-name
is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 55 characters.
vlan vlanid
: Configures to display the local users belonged to specified VLAN.
vlanid
is
the integer, ranging from 1 to 4094.
Description
Use the
display local-user
command to view the relevant information about all the
local users or the specified one(s).
The output can help you with the fault diagnosis and troubleshooting related to local
user.
By default, this command displays the relevant information about all the local users.
Related command:
local-user
.
Example
# Display the relevant information of all the local users.
<Quidway> display local-user
The contents of local user user1:
State: Active ServiceType Mask: None
Idle Cut: Disable
AccessLimit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable
IP address: Disable
MAC address: Disable
Total 1 local user(s) Matched,1 listed.
Table 2-1
Description of output information of the
display local-user
command
Field Description
State State
Idle Cut Idle cut switch
AccessLimit Limit on the number of access connections
Bind location Whether to be bound with port