Huawei Quidway S8500 Series, Руководство по управлению

Страница: 802 / 1341

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-4
Description
Use the static-lsp egress l2vpn command to create a static L2VPN LSP for the egress
label switching router (LSR).
Use the undo static-lsp egress command to remove a L2VPN LSP created for the
egress LSR.
You need to create two LSPs (for transmitting and receiving) before creating a remote
CCC connection.
Related command: static-lsp ingress l2vpn , static-lsp transit l2vpn , debugging
mpls .
Example
# Create a static LSP named bj-sh on the egress LSR.
[Quidway-mpls] static-lsp egress bj-sh l2vpn incoming-interface
vlan-interface 201 in-label 233
3.1.5 static-lsp ingress
Syntax
static-lsp ingress lsp-name l2vpn nexthop next-hop-addr out-label out-label
undo static-lsp ingress lsp-name
View
MPLS view
Parameter
lsp-name : Name of the LSP.
next-hop-addr : Address of the next hop.
out-label : Value of the out-label, ranging from 16 to 1,023.
Description
Use the static-lsp ingress l2vpn command to create a static L2VPN LSP for the
ingress LSR.
Use the undo static-lsp command to remove a static L2VPN LSP.
You need to create two LSPs (for transmitting and receiving) before creating a remote
CCC connection.
Related command: static-lsp engress l2vpn , static-lsp transit , debugging mpls .