Huawei Quidway S8500 Series, Руководство по управлению

Страница: 131 / 1341

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-24
Note that two nodes’ bridge MAC addresses cannot be the same on the ring. Here both
Ringlet0 and Ringlet1 refer to sending sub-rings.
Example
# Transport data packets to the destination node with MAC address 0001-0002-0003
over ringlet0, and transport data packets to the destination node with MAC address
0001-0002-0004 over ringlet1.
<Quidway> system-view
[Quidway] interface RPR2/1/1
[Quidway-RPR2/1/1] rpr static-rs 0001-0002-0003 ringlet0
[Quidway-RPR2/1/1] rpr static-rs 0001-0002-0004 ringlet1
4.1.23 rpr station-name
Syntax
rpr station - name string
undo rpr station - name string
View
RPR logical port view
Parameter
string : Station name, a string consisting of up to 20 characters.
Description
Use the rpr station - name command to configure a station name.
Use the undo rpr station - name command to remove the configuration.
Example
# Name the local station “hangzhou”.
<Quidway> system-view
[Quidway] interface RPR2/1/1
[Quidway-RPR2/1/1] rpr station-name hangzhou
4.1.24 rpr timer
Syntax
rpr timer { atd value | fdd value | holdoff value | stability value | tp - fast value |
tp - slow value | tc - fast value | tc - slow value | wtr value }
undo rpr timer { atd | fdd | holdoff | stability | tp - fast | tp - slow | tc - fast | tc - slow |
wtr }