Huawei Quidway S8500 Series, Руководство по управлению

Страница: 906 / 1341

Command Manual – Security
Quidway S8500 Series Routing Switches Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-20
Description
Use the
service-type
command to configure a service type for a particular user.
Use the
undo service-type
command to cancel the specified service type for the user.
Example
# Set to provide the Lan-access service for the user huawei1.
[Quidway-luser-huawei1] service-type lan-access
2.1.20 state
Syntax
state
{
active
|
block
}
View
ISP domain view, Local user view
Parameter
active
: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in active state, that is, the system allows the users in the domain (ISP
domain view) or the current user (local user view) to request network service.
block
: Configures the current ISP domain (ISP domain view)/current user (local user
view) as being in block state, that is, the system does not allow the users in the domain
(ISP domain view) or the current user (local user view) to request network service.
Description
Use the
state
command to configure the state of the current ISP domain/ current user.
By default, after an ISP domain is created, it is in the
active
state (in ISP domain view).
A local user will be
active
(in local user view) upon its creation.
In ISP domain view, every ISP can either be in Active or Block state. If an ISP domain is
configured to be Active, the users in it can request for network service, while in Block
state, its users cannot request for any network service, which will not affect the users
currently online.
Related command:
domain
.
Example
# Set the current ISP domain huawei163.net to be in the block state. The supplicants in
this domain cannot request for the network service.
[Quidway-isp-huawei163.net] state block
# Set the user huawei1 to be in the block state.