Step 8
Click
Complete
.
----End
4.25.30 Querying Information About a Host
This section introduces the procedure for querying information about a host.
Procedure
Step 1
In the navigation tree, click the
Logical
tab.
Step 2
In the navigation tree, select the
Host Group
node.
Step 3
Unfold the host group node to which the host whose information is to be viewed belongs.
Step 4
Click the host whose information is to be viewed.
In the operation area, the host information is listed.
Step 5
For descriptions of the parameters for viewing information about mapped volumes of the host,
see
4.26.33 Parameter Description: Querying Information About a Host
Step 6
Click the
Port and Initiator
tab.
Step 7
For the the parameters for viewing interface information of the host, see
Description: Querying Information About a Host
Step 8
For the the parameters for viewing information about the iSCSI initiator of the host, see
Parameter Description: Querying Information About a Host
----End
4.25.31 Deleting a Host
This section introduces the procedure for deleting a host.
Procedure
Step 1
In the navigation tree, click the
Logical
tab.
Step 2
In the navigation tree, select the
Host Group
node.
Step 3
Unfold the host group node under which a host is to be deleted.
Step 4
Click the host that is to be deleted.
Step 5
On the menu bar, choose
Configuration
>
Delete Host...
.
The
Warning
dialog box is displayed.
TIP
You can also delete a host by the following two methods:
l
On the toolbar, click
.
l
Click the right mouse button, and choose
Delete Host...
from the shortcut menu.
Step 6
Click
OK
.
4 Configuring Basic Services
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
4-96
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 08 (2010-05-10)