Step 5
Enter the command
iscsiutil –l
to view the name of the iSCSI initiator.
l
Enter the command
iscsiutil –i –N initiator name
to modify the name of the iSCSI initiator.
l
Enter the command
iscsiutil –i –A initiator alias
to add an alias of the iSCSI initiator.
Step 6
Enter the command
iscsiutil –a –I 192.168.22.44
to add a target.
192.168.22.44
represents the IP address of the target.
The target is successfully added.
shows the information displayed on the screen.
Figure 4-47
Adding a target successfully
After adding a target, enter the command
iscsiutil –p –D
to view target information , as shown
in
.
Figure 4-48
Viewing target information
Step 7
Enter the command
/usr/sbin/ioscan –H 255
to discover the target device, as shown in
.
Figure 4-49
Discovering the target device
4 Configuring Basic Services
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
4-54
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 08 (2010-05-10)