4.2 Connecting a Speed Dome over the Internet
Purpose
This section explains how to connect the network speed dome to the WAN with a static IP or a
dynamic IP.
4.2.1 Static IP Connection
Before you start, obtain a static IP address from your Internet Service Provider (ISP).
With the static IP address, you can connect a speed dome to the Internet directly or through a
router.
Connecting the network speed dome via a router
Step 1
Connect the network speed dome to the router.
Step 2
Assign a LAN IP address, the subnet mask and the gateway.
Step 3
Save the static IP in the router.
Step 4
Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary depending on
different routers. Please call the router manufacturer for assistance with port mapping.
NOTE
Refer to
for port mapping details.
Step 5
Visit the network speed dome through a web browser or the client software over the internet.
Figure 4-3
Accessing the Speed Dome through Router with Static IP
----End
Connecting the network speed dome with static IP directly
You can also save the static IP in the speed dome and directly connect it to the internet without
using a router.
Figure 4-4
Accessing the Speed Dome with Static IP Directly
IPC6512-Z30&6522-Z30
User Guide
4 Network Connection and Setup
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
