HSM SP 5080 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 57

HSM SP 5080 Скачать руководство пользователя страница 7

04/2013

2.990.999.120_en

7

SP 5080

Foreword

This Operating Manual informs you in detail about the start-up and maintenance of your
new baling press. It also contains notes on safety which must be observed.

To a great extent, the performance of your baling press depends on its proper applica-
tion and thorough maintenance. You should carefully read this Operating Manual and
the notes on safety and always keep them safe at hand. You can thus prevent accidents,
maintain your guarantee claims against the manufacturer and always have an operative
baling press.

HSM GmbH + Co. KG

permanently aspire to improve their products. They reserve the

right to perform any changes and modifi cations which are deemed necessary. Howev-
er, this does not imply the obligation for a subsequent modifi cation of already delivered
machines.

Technical modifi cations as compared to the representations and statements in this Oper-
ating Manual which become necessary to improve the baling press are reserved.

This Operating Manual is intended for staff installing, operating and servicing the baling
press. It includes technical specifi cations and drawings which must not be copied, distrib-
uted or used for competitive purposes or given to third parties completely or in part.

Please contact your local dealer if you still have questions after having read this Operat-
ing Manual.

«
...
5
6
7
8
9
...
»

Содержание SP 5080


























































Отзывы:

Нет отзывов