HSM SP 5080 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 57

HSM SP 5080 Скачать руководство пользователя страница 27

04/2013

2.990.999.120_en

27

SP 5080

0

I

0

Main switch (1)

The main switch is on when it is turned 90° to the right.
In the “Off” position, the main switch can be secured with a padlock.

“Automatic mode” key (2)

This key switches the baling press into automatic mode. Deselect the automatic mode by
pressing the key again.

“Automatic mode” LED (3)

This symbol lights up white as soon as the automatic mode is switched on.

“Standby” LED (4)

This symbol lights up green as soon as the main switch is switched on and the machine re-
ceives power.
This symbol fl ashes in the set-up mode or with the “Bale ready” message

“Press ram forward” key (5)

(arrow in direction of pressing)
This key starts the press cycle. The press ram moves forward and presses the material.
After the compression time has expired, the press ram automatically moves to the rear
limit position. The motor switches off.

“Stop press ram” key (6)

This key is used to stop the press ram in any position.

“Press ram backward” key (7)

(arrow opposite direction of pressing)
This key moves the press ram back to the rear limit position.

«
...
25
26
27
28
29
...
»

Содержание SP 5080


























































Отзывы:

Нет отзывов