HSM SP 5080, Руководство по эксплуатации, Страница: 10 / 57

10
2.990.999.120_en
04/2013
SP 5080
– Do not carry out any tasks which may endanger your safety while operating the machine.
– Any changes which take place and could impair safety should be reported immediately. Put
the machine out of operation until the damage is rectifi ed.
– Always make sure the machine is in perfect condition before you switch it on.
– Make sure the area around the machine is clean and safe.
– Unauthorised modifi cations and changes to the machine are strictly prohibited. Protective
devices may not be removed or otherwise rendered inoperative.
– No work on the machine which is not part of its normal operation may be performed while
the machine is still running.
– Never open doors and fl aps before the machine has been shut down. Note the instruction
plate.
– Test the protective measures installed after any electrical or repair work.
– No platforms or other raised surfaces may be placed near the shredder press combination
if they encroach on the specifi ed safety clearances.
– Connecting cables must be laid in such a way that they cannot be tripped over.
– Only persons with the appropriate skills and experience in hydraulics may carry out work
on the hydraulic equipment.
– All lines, pipes and bolted joints must be regularly inspected for looseness, leaks and vis-
ible damage. Any damage must be repaired immediately. Escaping oil can cause fi re and
injury
– Any parts of the system and hydraulic pressure lines that need to be opened must be de-
pressurised according to the assembly instructions before commencing repair work.