HSM SP 5080 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 57

HSM SP 5080 Скачать руководство пользователя страница 57

04/2013

2.990.999.120_en

57

SP 5080

EC declaration of conformity

The manufacturer

HSM GmbH + Co. KG

Austraße 1-9

D - 88699 Frickingen

hereby declares that the described

SP 5080 shredder press combination

, consisting of the FA

500.3 shredder and the KP 80 baling press, comply with the basic safety and health requirements
of the following EC directives :
• 2006/42/EG
• 2004/108/EG

Applied standards and technical specifi cations:

EN1010-3:2002+A1, EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009,

EN ISO 13857:2008, EN 13849-1 (2008), EN 60204-1:2006+A1:2009,

EN 349:1993+A1:2008,EN 55014-1:2006+A1:2009, EN 61000-6-4 (01.07), EN 61000-6-2 (03.06)

The individual operation of the machines is prohibited. Only the combination of the shredder and
the baling press complies with EN 13857 (safety distances).

Frickingen, 15.02.2011

p. p. Hubert Kötzinger
Head of Environmental Engineering Product Development

Authorised representative for the compilation of technical documentation:
Hubert Kötzinger, HSM GmbH + Co. KG.

The technical documentation in terms of Appendix VII, Part A has been created and is available at
HSM GmbH + Co.KG.
This declaration only relates to those machines that are in the same condition as they were when
put into circulation, no regard can be to parts added later by the end user and/or any work conduct-
ed subsequently.

11

EC declaration of conformity

«
...
55
56
57

Содержание SP 5080


























































Отзывы:

Нет отзывов