HSM SP 5080 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 57

HSM SP 5080 Скачать руководство пользователя страница 29

04/2013

2.990.999.120_en

29

SP 5080

Two hand control (12)

Note

This only functions when the “Bale ready” symbol is on, or in the set-up mode.

Two hand control: Open the hydraulic door lock (7 + 12)

If you simultaneously press the two keys (within 0.6 seconds), the door lock is opened.
If you let go of one of these keys, the action stops.

Two hand control: Close the hydraulic door lock (5 + 12)

If you simultaneously press the two keys (within 0.6 seconds), the door lock is closed.
If you let go of one of these keys, the action stops.

Two hand control: Press ram forward (5 + 12)

If you simultaneously press the two keys (within 0.6 seconds), you can run the press ram
forwards whilst the counter plate is open. If you let go of one of these keys, the press
ram stops.

Two hand control: Press ram backward (7 + 12)

If you simultaneously press the two keys (within 0.6 seconds), you can run the press ram
backwards

whilst the counter plate is open

. If you let go of one of these keys,

the press ram stops.

Bale length (13)

By turning the switch, 2 bale lengths or bale weights can respectively be set. This depends on
the position of the inductive switch. (on the side of the press chamber)

Inductive switch in hole 1 and 3:

: 30 kg /

: 80 kg

Inductive switch in hole 2 and 3:

: 30 kg /

: 60 kg

Emergency stop (14) optional

Turn the emergency stop button counter-clockwise to unlock it. If you press the
“Emergency stop” button the power circuit is broken. Thereby switching the press and
shredder off.

2

1

3

«
...
27
28
29
30
31
...
»

Содержание SP 5080


























































Отзывы:

Нет отзывов