25
HT130003 / HT130042
HT130030 / HT130043
User Manual
CorTemp
®
Data Recorder v4.3
9001 Series
1.
Plug the MF6 connector of the Data Transfer Cable into the Data Port on the recorder.
2.
Connect the DB9 serial connector of the Data Transfer Cable to the appropriate COM
port on the PC / Laptop.
3.
Turn ON the recorder.
4. From
EXIT / STBY
mode, press
MENU
.
5. Press
READ
until the
DATA TRANSFER / PC LINK
screen displays.
6. Press
either
F2
to initiate
PC LINK
for communication to the CorTrack
®
II Software
OR
press
F1
to initiate
DATA TRANSFER
to a terminal program.
7. Press
RUN / STOP
to terminate
PC LINK
or
DATA TRANSFER.
8. Press
ENTER
to return to
EXIT / STBY
mode.
9.
Unplug the MF6 connector of the Data Transfer Cable from the Data Port on the
recorder.
NOTE:
When removing the MF6 connector from the Data Recorder,
push and hold the locking tab all the way down while removing the MF6
connector.
D.2. Downloading Data to CorTrack
®
II Software
Refer to the
CorTrack
®
II Software User Manual
for downloading instructions.
Locking Tab
ON / OFF Switch
Data Port
MF6 Connector
