21
HT130003 / HT130042
HT130030 / HT130043
User Manual
CorTemp
®
Data Recorder v4.3
9001 Series
B.1. Administering the Sensor and Checking the Signal
Before administering the sensor, be sure to review the
Intended Use / Contraindications /
Warnings
for the HQI Temperature Sensor.
NOTE: The sensor should be administered
at least 4 – 6 hours before monitoring / data collection begins.
To administer the HQI Temperature Sensor, do the following:
1.
Remove the magnet from the HQI Temperature Sensor.
2.
Verify the sensor has an active signal using the
SENSOR TEST
function.
3.
Remove the sensor Warranty Seal.
4.
Give the sensor to the subject (player) as per your organization's protocol
B.2. Placement of the Data Recorder
AUTO RUN MODE – Standard Menu
1.
Attach the Data Recorder Pouch to the monitored subject via the belt loop.
2.
Place the recorder into the pouch with the recorder keypad
facing outward
from the
monitored subject and aligning the Data Port down towards the cable relief in the
bottom of the pouch.
NOTE: The recorder will receive the best signal when placed at the small of the
back. When placement at the small of the back is not feasible, the recorder can be
worn near the hip on either side, or on the front at hip level.
