16
HT130003 / HT130042
HT130030 / HT130043
User Manual
CorTemp
®
Data Recorder v4.3
9001 Series
When the recorder detects low battery power during the
EXIT / STBY
or
AUTO RUN MODE
,
the recorder screen will display
LBAT
. The unit will end data collection and go into sleep
mode.
A.20. Signal Detector
The recorder can be programmed to display either an obviously incorrect temperature
reading or no temperature reading when the receiver loses the sensor signal while in
AUTO
RUN MODE
. The Signal Detect feature can be used to eliminate confusion and facilitate
ease of data analysis. (Refer to
Appendix 3: Data Interpretation Key
)
To set the detect signal feature, do the following:
1. From
EXIT / STBY
mode, press
MENU
.
2. Press
READ
until the
SET BAT / DETECT SIG
screen displays.
3. Press
F2
to set the
DETECT SIG
status,
DETECT SIG
will toggle between
ON
and
OFF
.
NOTE: Default is ON.
4. Press
ENTER
to return to
EXIT / STBY
mode.
When the
DETECT SIG
feature is turned
ON,
the recorder will display
T = ---.--
, which
records a no-read to memory. The no-read will appear as
8888.88
in the downloaded data.
A.21. Heart Rate Interval
If your recorder is equipped with the heart rate option, the recorder will show
CORTEMP
HR REV 4.3H
, for example, during start up.
The heart rate programming screen allows you to select the Heart Rate Interval. The
interval can be set at 1, 2 or 3 beats. The recorder will sample the selected number of
CorTemp
®
CorTemp
®
CorTemp
®
Heart Rate Designation
CorTemp
®
CorTemp
®
AUTO RUN MODE
SPORTS MODE
