HPE FlexNetwork 5130 HI SERIES, Руководство по настройке

Страница: 35 / 286

26
Figure 4 MAC address tables of devices when Client A roams to AP D
To enable MAC address synchronization:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enable MAC address
synchronization.
mac-address mac-roaming
enable
By default, MAC address
synchronization is disabled.
Enable MAC address move notifications
The outgoing interface for a MAC address entry learned on interface A is changed to interface B
when the following conditions exist:
•
Interface B receives a packet with the MAC address as the source MAC address.
•
Interface B belongs to the same VLAN as interface A.
In this case, the MAC address is moved from interface A to interface B, and a MAC address move
occurs.
If a MAC address is continuously moved between the two interfaces, Layer 2 loops might occur.. To
detect and locate loops, you can view the MAC address move information.
When the system detects that a MAC address frequently moves from an interface, you can configure
MAC address move suppression on the interface to bring it down. The interface can automatically
come up after waiting for the specified suppression interval. Or, you can manually bring up the
interface. To make MAC address move suppression take effect, you must use this feature together
with ARP fast update. For more information about ARP fast update, see
" Enabling ARP fast update
for MAC address moves ."
To display the MAC address move records after the device is started, use the
display mac-address
mac-move
command.
To enable MAC address move notifications: