7.
Select a Target Appliance from the list and click
Next
.
NOTE:
If you want to select an appliance that is not yet on the list, click
Add Target Appliance
.
Enter the Target Appliance IP Address or fully qualified domain name. The default values for
the Command and Data Protocol Port Numbers may not be edited. (If replication needs to
take place through a firewall, the network administrator will need to open (TCP) ports 9387
(Command protocol) and 9388 (Data protocol) to allow the replication traffic to pass to and
from the HP StoreOnce Backup systems.) Click
Add Target Appliance
.
See also
How do I identify the IP address of a service set? (page 41)
.
8.
The wizard then moves to the Select Target Share step. Select a share on the target appliance
and click
Next
.
70
Replication functions
