HDMI/USB board
NOTE:
The HDMI/USB board does not include the HDMI/USB board cable. The HDMI/USB board cable is
included in the Cable Kit, spare part number 742103-001. See
Cable Kit on page 21
for more Cable Kit spare
part information.
Description
Spare part number
HDMI/USB board (includes HDMI port and USB port)
742107-001
Before removing the HDMI/USB board, follow these steps:
1.
Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off
or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet
and keyboard base.
3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
Bottom cover on page 65
), and then remove the following components:
a.
I/O board (see
I/O board on page 66
)
b.
TouchPad (see
TouchPad on page 68
)
c.
Keyboard base battery (see
Keyboard base battery on page 69
)
d.
Power connector cable and bracket (see
Power connector cable on page 70
)
Remove the HDMI/USB board:
1.
Detach the HDMI/USB board cable
(1)
from the keyboard base. (The HDMI/USB board cable is attached
to the keyboard base with double-sided adhesive.)
2.
Disconnect the hinge assembly cable
(2)
from the USB board.
3.
Release the ZIF connector
(3)
to which the keyboard cable is attached, and then disconnect the
keyboard cable from the HDMI/USB board.
4.
Remove the three Phillips PM2.0×3.25 screws
(4)
that secure the HDMI/USB board to the
keyboard base.
Removal and replacement procedures
73
Содержание Spectre 13x2 Pro
