HP Spectre 13x2 Pro, Руководство по техническому обслуживанию и ремонту

Страница: 55 / 103

Before removing the heat sink, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 36 ).
5. Remove the tablet battery (see Tablet battery on page 37 ).
Remove the heat sink:
1. Loosen the three Phillips captive screws (1) that secure the heat sink to the system board.
2. Remove the heat sink (2) .
NOTE: Due to the adhesive quality of the thermal material located between the heat sink and the
system board components, it may be necessary to move the heat sink from side to side to detach it.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system
board components each time the heat sink is removed. Replacement thermal material is included with the
heat sink and system board spare part kits. Thermal paste is used on the processor (1) and the heat sink
section (2) that services it.
Removal and replacement procedures 47