HP Spectre 13x2 Pro Скачать руководство пользователя страница 59

Страница: 59 / 103

TouchScreen board

NOTE:

The TouchScreen board is included with the display panel assembly spare part kit, spare part

numbers 737696-001 (13.3-inch, AG, FHD, WLED TouchScreen, display panel assembly) and 737697-001

(13.3-inch, AG, HD, WLED TouchScreen, display assembly).

NOTE:

The TouchScreen board does not include the TouchScreen board cable. The TouchScreen board cable

is included in the Cable Kit, spare part number 742103-001. See

Cable Kit on page 21

for more Cable Kit spare

part information.

Before removing the TouchScreen board, follow these steps:

Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

Disconnect the power from the tablet by unplugging the power cord from the tablet.

Disconnect all external devices from the tablet.

Remove the back cover (see

Back cover on page 36

Remove the tablet battery (see

Tablet battery on page 37

Remove the TouchScreen board:

Release the two TouchScreen board ZIF connectors

(1)

and

(2)

to which the display panel TouchScreen

cables are attached, and then disconnect the display panel TouchScreen cables from the TouchScreen

board.

Release the system board ZIF connector

(3)

to which the TouchScreen board cable is attached, and then

disconnect the TouchScreen board cable from the system board.

Detach the TouchScreen board

(4)

from the display assembly. (The TouchScreen board is attached to

the display assembly with double-sided adhesive.)

Remove the TouchScreen board and cable.

Reverse this procedure to install the TouchScreen board.

NFC module

Description

Spare part number

NFC module (includes double-sided adhesive)

736886-001

Removal and replacement procedures

Содержание Spectre 13x2 Pro








































































































Результаты поиска

Содержание Spectre 13x2 Pro

Отзывы:

Похожие инструкции для Spectre 13x2 Pro

Бренды по названию

Популярные бренды

HP Spectre 13x2 Pro, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Spectre 13x2 Pro

Отзывы:

Похожие инструкции для Spectre 13x2 Pro

Бренды по названию

Популярные бренды