Before removing the webcamera/microphone module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 36
).
5.
Remove the tablet battery (see
Tablet battery on page 37
).
Remove the webcamera/microphone module:
1.
Detach the grounding tape
(1)
that secures the webcamera/microphone module to the
display assembly.
2.
Disconnect the webcamera/microphone module cable
(2)
from the system board.
3.
Detach the webcamera/microphone module
(3)
from the display assembly. (The webcamera/
microphone module is attached to the display assembly with double-sided adhesive.)
4.
Remove the webcamera/microphone module and cable.
Reverse this procedure to install the webcamera/microphone module.
40
Chapter 5 Removal and replacement preliminary requirements
Содержание Spectre 13x2 Pro
